2019 IEEE INTERNATIONAL WORKSHOP ON METROLOGY FOR AEROSPACE
WEDNESDAY - JUNE 19, 2019
09:30 - 13:00 MILITARY METROLOGY FOR AEROSPACE - AUDITORIUM ALTEC
Corso Marche, 79 - Torino
09:30 - 09:50 WELCOME ADDRESSES
B.Gen. (aus) Dario NICOLELLA - President of AFCEA Chapter Naples
Eng. Armando Ciampolini - ALTEC Operative Director
09:50 - 10:20 EMERGING TECHNOLOGIES IN AEROSPACE ENVIRONMENT
Maj.Gen. (aus) Maurizio Astolfi, Italian Air Force Logistic Command
10:20 - 10:50 SPACE RIDER: Development for Payloads Return
Dr Angelo DENARO -
Program Design Authority & Chief Engineer - Program Space Rider
10:50 - 11:30 CAPABILITIES AND POTENTIAL OF RPAS SYSTEM IN A CIVILIAN AND INDUSTRIAL ENVIROMENT
B.Gen. (res.) Giovanni SAVOLDELLI PEDROCCHI
11:30 - 12:00 USE OF THE S3000 FOR THE OPTIMIZATION OF PROJECTS IN ORDER TO REDUCE THE RISK OF OBSOLESCENCE OF COMPLEX SYSTEMS
Eng. Eduardo DE FRANCESCO,
FederLazio Aerospazio e Difesa
12:00 - 12:30 METROLOGY IN MILITARY AIRCRAFT MAINTENANCE
Col. GArn. Roberto LO CONTE,
1° RMV Director - Cameri
12:30 - 13:00 FROM ISS INTEGRATED LOGISTICS TO SPACE RIDER PAYLOADS END-TO-END SERVICE
Eng. Armando Ciampolini -
ALTEC Operative Director
13:00 - 13:10 CLOSING SESSION
15:30 - 17:45 TUTORIALS
ALTEC Company - Corso Marche 79 - Torino
15:30 - 16:15 Session #1 - Stefano Cesare, Thales Alenia Space
Optical Metrology for Measuring Earth’s Gravity
16:15 - 17:00 Session #2 - Ephraim Suhir, Portland State University
Probabilistic-Risk-Analysis in Aerospace Human-in-the-Loop Problems
17:00 - 17:45 Session #3
19:00 WELCOME RECEPTION
Osteria "Rabezzana" - June 19 - H 19.00
2019 IEEE INTERNATIONAL WORKSHOP ON METROLOGY FOR AEROSPACE
THURSDAY - JUNE 20, 2019
09:20 - 09:50 OPENING CEREMONY
09:50 - 11:20 Session #1 Session #2 Session #3 Session #4
SPECIAL SESSION ON MEASUREMENT AND INSTRUMENTATION FOR AEROSPACE APPLICATION - PART I SPECIAL SESSION ON DESIGN FOR RELIABILITY OF AEROSPACE INSTRUMENTATION - PART I GENERAL SESSION PART 1 SPECIAL SESSION ON STRUCTURAL HEALTH MONITORING AND NONDESTRUCTIVE TESTING FOR AEROSPACE - PART I
1020 -  LIDAR-based model reconstruction for spacecraft pose determination
Davide Maria Perfetto, Roberto Opromolla, Michele Grassi, Christoph Schmitt
1015 -  Failure-Oriented-Accelerated-Testing and Its Role in Making a Device into a Product
Ephraim Suhir
1133 - Design and characterization of innovative 3D printed embedded strain gauges
Anna Lanzolla, Gregorio Andria, Attilio Di Nisio, Gianluca Percoco, Giovanni Stano
1019 - Robotic Geometric and Volumetric Inspection of High Value and Large Scale Aircraft Wings
Carmelo Mineo, Charles Norman MacLeod, Riliang Su, David Lines, Santi Davì, Bruce Cowan, Stephan Gareth Pierce, Scott Paton, Gavin Munro, Coreen McCubbin, David Watson, William Kerr, Richard Millar
1051 -  Uncertainty evaluation of vision-based approaches for distance measurement of a tether tip-mass
Marco Pertile, Sebastiano Chiodini, Andrea Valmorbida, Riccardo Giubilato, Stefano Debei, Enrico C. Lorenzini
988 - SELECTION OF PRECISE SENSORS FOR WIG-CRAFT ALTITUDE CONTROL
Alexander V. Nebylov, Vladimir A. Nebylov, Alexander I. Panferov
1031 - Degarbling Technique for Low Cost ADS-B Receivers
Mauro Leonardi, Marco Maisano
1022 - Surface Ice Detection on Composite Plates with Ultrasonic Guided Waves
Jochen Moll, Jonas Simon, Vittorio Memmolo
1068 - Analysis of Ganymede rotational state using JANUS telescope
Alessio Aboudan, Giacomo Colombatti, Stefano Debei, Pasquale Palumbo
1009 -  Degraded situation awareness risk assessment in the aerospace domain
Jean-Marc Salotti, Ephraim Suhir
1028 - The J2 Relativistic Effect and Other Periodic Variations in the Galileo Satellite Clocks
Valerio Formichella, Lorenzo Galleani, Ilaria Sesia, Giovanna Signorile
1055 - Comparison of different non-destructive testing techniques for bonding quality evaluation
Bengisu YILMAZ, Elena Jasiuniene, Abdoulaye Ba, Huu Kien Bui, Gerard Berthiau
1085 - Measurement Digital Watermarking for Automated Test System Data Integrity
Christopher Geiger
1017 - PHYSICAL DESIGN FOR RELIABILITY OF SOLDER JOINT INTERCONNECTIONS FOR AEROSPACE ELECTRONICS APPLICATIONS
Ephraim Suhir
1007 -  Ellipsoid multi-axial sensor calibration with temperature compensation
 Jacek Pieniazek
1090 - Acoustic Source Localization – Recent Advances and Remaining Challenges
Tribikram Kundu
1115 -  Design of a SpaceWire/SpaceFibre EGSE system based on PXI industry standard
Luca Dello Sterpaio, Pietro Nannipieri, Antonino Marino, Luca Fanucci
1161 -  Outline of the reliability and durability estimation method of aircraft on-board accumulator batteries
Michał Jasztal
1061 -  Wearable Cardiorespiratory Sensor Performance Characterisation for Air Traffic Management Applications
Nichakorn Pongsakornsathien, Alessandro Gardi, Roberto Sabatini
1101 - Research on aero-engine vibration fault based on statistical feature and artificial intelligence method
Yahui Wu
11:20 - 11:40 COFFEE BREAK
11:40 - 13:20 Session #5 Session #6 Session #7 Session #8
SPECIAL SESSION ON MEASUREMENT AND INSTRUMENTATION FOR AEROSPACE APPLICATION - PART II SPECIAL SESSION ON DESIGN FOR RELIABILITY OF AEROSPACE INSTRUMENTATION - PART II SPECIAL SESSION ON METROLOGY AND INSTRUMENTATION FOR UNMANNED AERIAL VEHICLES - PART I SPECIAL SESSION ON STRUCTURAL HEALTH MONITORING AND NONDESTRUCTIVE TESTING FOR AEROSPACE - PART II
1058 - The Shadow Position Sensors (SPS) metrology subsystem on-board PROBA-3 mission
Vladimiro Noce
994 - Features of designing control systems of WIG-craft
Alexander I. Panferov, Alexander V. Nebylov, Sergey A. Brodsky
Open source, low-cost and modular fixed-wing UAV with BVLOS flight capabilities for geohazards monitoring and surveying
Diego Guenzi, Marco Baldo, Paolo Allasia, Daniele Giordan
1104 - An innovative method based on nonlinear Lamb waves for locating disbonds in Single-Lap joints
Stefano Carrino, Francesco Nicassio, Gennaro Scarselli
1064 - MEASURING THE MASS OF A MAIN BELT COMET: PROTEUS MISSION
Riccardo Lasagni Manghi, Marco Zannoni, Paolo Tortora, Dario Modenini
975 - Qualitative Assessment of the Reliability of Human Performance Systemic-Structural Activity Theory Perspective
 
Inna Bedny
1098 - Experimental method of controller tuning for quadcopters
Konrad Wojtowicz, Michał Waliszkiewicz, Zdzisław Rochala 
1108 - Design of Slot Antenna Based Sensors for Blade Tip Clearance Measurement in Turbine Engines
Xingjuan Xie
1072 - Fine positioning algorithms for the ESA/PROBA-3 formation flying mission
Marta Casti
1024 -  Theoretical premises for development of perfect communication channels "small satellites - earth"
Anatoliy Platonov
1001 -  Small UAV’s position and attitude estimation using tightly coupled multi baseline multi constellation GNSS and inertial sensor fusion
Marton Farkas, Balint Vanek, Szabolcs Rozsa
1121 - Nonlinear Dynamics of Cracked, Cantilevered Beam-like Structures Undergoing Large Deflections
Luca Zanotti Fragonara
N/A Progress on Laser Gauge Interferometer (LIG-A) for high resolution accelerometers
M. Pisani, M. Zucco, R. Pegna and A. Nobili
1089 - A 1.15 Grad total-ionizing-dose tolerance parallel operation oriented optically reconfigurable gate array VLSI
 Minoru Watanabe
1035 -  Wireless Local Positioning System for Controlled UAV Landing in GNSS-Denied Environment
Tatiana Pavlenko, Martin Schütz, Thomas Walter, Sergio Montenegro, Martin Vossiek
1126 - Ultrasonic Phased Array Imaging Technology for the Inspection of Aerospace Composite Structures
Luca Zanotti Fragonara
1122 - Design validation of MicroMED, a particle analyzer for ExoMars 2020
Diego Scaccabarozzi
1143 -  Current Status, and Future of Research on Optical and Electrical Semiconductor Devices
Takashi Matsuoka
1171 -  Link performance evaluation procedure for the introduction of unmanned air vehicles in civil airspace
gabriella serafino, Ermanno Pietrosemoli, Fulvio Babich, damiano derin
1021 - A multi-channel system for on-line structural health monitoring using guided waves
Vittorio Memmolo, Leandro Maio, Ernesto Monaco, Nicola Ciminiello, Barbara Di Giampaolo
13:20 - 14:50 LUNCH
14:50 - 15:40 Invited Talk - Yonina Eldar
Recovering lost information in analog-to-digital conversion
15:40 - 16:00 COFFEE BREAK
16:00 - 17:40 Session #9 Session #10 Session #11 Session #12
SPECIAL SESSION ON COMPLEX SYSTEMS OPERATIONAL AVAILABILITY: MEASUREMENTS, METHODOLOGIES AND REQUIREMENTS SPECIAL SESSION ON MEASUREMENT FOR IMPROVING QUALITY, RELIABILITY AND SAFETY IN AEROSPACE APPLICATIONS SPECIAL SESSION ON METROLOGY AND INSTRUMENTATION FOR UNMANNED AERIAL VEHICLES - PART II INDUSTRIAL SESSION ON METROLOGY AND MEASUREMENT FOR AEROSPACE COMPLEX SYSTEM APPLICATIONS
1087 -  Probe Position Error Compensation in Near-field to Far-field Pattern Measurements
Fabio Leccese
999 - Assemble Torque Measurement of Aero-Engine Rotor Blisk inside Deep and Confined Cavity
Te Li, Kuo Liu, Guiben Tuo, Jiali Zhang, Yue Ma
1099 - ArUco markers pose estimation in UAV landing aid system
Adam Marut, Konrad Wojtowicz, Krzysztof Falkowski
1181 - The Mars Terrain Simulator: a high level measurement facility in support to the ExoMars mission
Lorenzo Bramante, Marco Barrera, Maurizio Deffacis, Chiara Picco, Diego Bussi, Paola Franceschetti
1088 - Inertial Navigation Systems for UAV: Uncertainty and Error Measurements
Fabio Leccese
1012 - Thickness measurement using ultrasonic scanning method for large aerospace thin-walled parts
Haibo Liu, Yongqing Wang, Meng Lian, Tongyu Zhang, Baoliang Liu
1069 - Calibration of an imaging system for monitoring light pollution from small UAVs
Pietro Fiorentin, Carlo Bettanini, Damiano Bogoni, Alessio Aboudan, Giacomo Colombatti
1183 -  The Optical Payload System facility
Silvano Fineschi, Marta Casti, Gerardo Capobianco,  Giuseppe Massone, Federico Landini, Maurizio Deffacis, Alessandro Bellomo 
1093 - Wireless sensor networks and flexible electronics as innovative solution for smart greenhouse monitoring in long-term space missions
Luca Maiolo
1053 -  Safe Return Path Mapping for Drone Applications
 João Morais, José Sanguino, Pedro Sebastião
1141 - UAV Pre-flight Structural Strength Verification during On-ground Static Load Test
Artur Kurnyta
1163 - Space START: the TAS concept for in orbit servicing
Carlo Cassi, Morena Bernardini, Cometto Ferdinando, Couzin Patrice, Vincent Dubanchet, Gautier Durand, Cristina Fedele, Genny Scalise, Stefania Voi 
1118 -  Rare earth modified Ni-gAlumina catalysts for CO2 recycling into life support consumables and fuel
Simonetta Tuti
1076 -  Condition monitoring of a morphing laminate with MFC piezoelectric patches via model-based approach
 Gianpietro Di Rito, Benedetto Luciano, Mario Rosario Chiarelli, Roberto Galatolo 
1073 -  Preliminary performance assessment of Radar-aided monocular Visual Odometry for small aerial platforms
Antonio Fulvio Scannapieco, Alfredo Renga, Maria Daniela Graziano, Giancarmine Fasano

1159 - High accuracy spacecraft attitude measurement: the Euclid Fine Guidance Sensor
Andrea Bosco 
1157 -  Use of the ASD S3000L for the Optimization of Projects in order to Reduce the Risk of Obsolescence of Complex Systems
Fabio Leccese 
1049 - Development of an Automatic Calibration System for Brazilian Airspace Control Activities
Carlos Alexandre Pontes Pizzino
1172 -  Specific Problems of Selecting and Integrating Equipment Components in the Course of Developing a Technology Demonstrator for the mini-UAV
Aleksander Olejnik, Robert Rogólski, Łukasz Kiszkowiak, Michał Szcześniak
20:00 GALA DINNER
"Caprera 1883" Restaurant
2019 IEEE INTERNATIONAL WORKSHOP ON METROLOGY FOR AEROSPACE
FRIDAY - JUNE 21, 2019
09:00 - 10:00 Invited Talk - Roberto Orosei
Radar evidence of subglacial liquid water on Mars
10:00 - 11:40 Session #13 Session #14 Session #15 Session #16
SPECIAL TRACK ON FUTURE SCIENCE OBJECTIVES AND TECHNOLOGIES FOR PLANETARY EXPLORATION - PART I SPECIAL SESSION ON METROLOGY FOR RADAR SYSTEMS SPECIAL SESSION ON METROLOGICAL AND TECHNOLOGICAL ASPECTS OF MANUFACTURING IN THE AEROSPACE INDUSTRY - PART I GENERAL SESSION PART 2
10.00 - Lorenzo BRUZZONE e Renato CROCI: "Radar for Icy Moon Exploration (RIME): Science and measurements, and instrument design" 977 - Exploitation of GNSS signals as illuminators of opportunity in Passive Coherent Location (PCL) systems
Edoardo Detoma
997 - Monitoring of the intensity of the electromagnetic field during the aircraft operation in the field of high frequencies
Joanna Michalowska, Arkadiusz Tofil, Jerz Jozwik
1033 - Issues on Uncertainty to Train Positioning in Hybridized-GNSS Approaches
Susanna Spinsante, Cosimo Stallo
10:30 - Pasquale PALUMBO e Giovanni Enrico NOCI: "Scientific objectives and key technical solutions for JANUS instrument onboard the JUICE mission" 986 - Environmental Effects on Ground-based Radar Measurements
Gabriele Pavan, Gaspare Galati, Christoph Wasserzier
1000 -  Effect of Milling Technology on Selected of Surface Layer Properties
Mariusz Kłonica, Jakub Matuszak, Ireneusz Zagórski
1067 - Deformation analysis of ATHENA test filters made of plastic thin films supported by a mesh under differential static pressure
Nicola Montinaro, Fabio D'anca, Ugo Lo Cicero, Paolo Giglio, Salvatore Ferruggia Bonura, Daniele Gulli, Elena Puccio, Marco Barbera
11:00 - Giuseppe PICCIONI e Leonardo TOMMASI: "Scientific goals and technical challenges of the MAJIS imaging spectrometer on board the JUICE mission" 990 - On the Exploitability of the Ka Band for Spaceborne Radar Debris Detection and Tracking Measurements
Marco Maffei, Augusto Aubry, Antonio De Maio, Alfonso Farina
1013 - Measurement and Analysis of Vibration in the Milling Process of Sintered Carbide Workpiece
Joanna Michalowska
1014 -  Design of COTS-Based Radio-Frequency Receiver for Cubsat Applications
Antonio Lovascio, Antonella D'Orazio, Vito Centonze 
  1006 -  Passive Radar Test Transponder
Sergio Gallone
1016 - An Automatic Measurement System for Camera and Star-sensor Alignment during GF-2 Assembly
Zaihua Yang
1003 -  Rapid RF test system for antennas integrated on microsatellites
Maria Alberica Saporetti, Francesco Saccardi, Giorgio Giordanengo, Marco Righero, Francesca Mioc, Giuseppe Vecchi, Lars Jacob Foged 
1011 - Radar Architectures Against Coherent Interferers
Linjie Yan, Chengpeng Hao, Pia Addabbo, Danilo Orlando, Alfonso Farina

1018 - Surface Morfology Analysis After Sintered Carbon Milling Process
Jerzy Jozwik, Jaroslaw Pytka, Stanislaw Legutko, Arkadiusz Tofil
1189 - A Time-Interleaved Non-Uniform Wavelet Bandpass Sampling Scheme for CS-based A-to-I Converters
Ioan Tudosa
11:40 - 12:00 COFFEE BREAK  
12:00 - 13:10 SPECIAL TRACK ON FUTURE SCIENCE OBJECTIVES AND TECHNOLOGIES FOR PLANETARY EXPLORATION - PART II POSTER SESSION

LIVE DEMONSTRATION SESSION

ALTEC - Mars Area
12:00 - Matteo MASSIRONI: "Future science goals of in situ lunar explorations"
12:15 - Maria Antonietta PERINO: "Back to the Moon"
12:30 - Paolo TORTORA e Valerio DI TANA: "LICIACube, the Italian witness of DART impact on Didymos"
13:00 - Silvano CASINI: "Government – Industry Collaboration Creating Commercial Opportunities"
13:10 - 14:30 LUNCH
14:30 - 16:10 Session #17 Session #18 Session #19 Session #20
GENERAL SESSION PART 3 SPECIAL SESSION ON TERRESTRIAL AND IN-FLIGHT VERIFICATION OF THE GNC SYSTEMS FOR AEROSPACE VEHICLES SPECIAL SESSION ON METROLOGICAL AND TECHNOLOGICAL ASPECTS OF MANUFACTURING IN THE AEROSPACE INDUSTRY - PART II SPECIAL SESSION ON DISTRIBUTED SYTEMS AND SENSOR FUSION APPLICATIONS FOR AEROSPACE
1135 - LOW TEMPERATURE POINT CONTACT SPECTROSCOPY AND TRANSPORT MEASUREMENTS OF FILLED SKUTTERUDITE COMPOUNDS
Paola Romano
1097 - A new method for satellite navigation signals FDI
Paolo Castaldi, Matteo Zanzi
1025 - Analysis of wear of cold forging dies using the technique of focal differentiation microscopy
Arkadiusz Tofil, Adam Ćwilła
1070 - In-flight estimation of magnetic biases on board of small UAVs exploiting cooperation
Roberto Opromolla, Giancarmine Fasano
1050 -  The contribution of a large baseline intersatellite link to relativistic metrology
Gael Cascioli, Fabrizio De Marchi, Antonio Genova, Luciano Iess, David Smith, Maria Zuber
1084 -  Stratospheric Balloon Attitude and Position Determination System Based on the VHF Omnidirectional Range Signal Processing: TARDIS Experiment
Luigi di Palo, Veronica Bandini, Emanuele Bedetti, Giulia Broggi, Luca Collettini, Paola Celesti, Davide Di Ienno, Riccardo Garofalo, Francesco Iovanna, Giulio Mattei, Paolo Marzioli, Fabrizio Piergentili, Fabio Santoni
1026 - The Use of a 3D Scanner and Measuring Faro Arm for Measuring of Bend Angle Bars on a Three-roller Bending Machine
Arkadiusz Tofil, Ireneusz Usydus
1145 - Redundant configuration of low-cost inertial sensors for advanced navigation of small unmanned aerial systems
Domenico Accardo, Giorgio de Alteriis, Rosario Schiano Lo Moriello, Raffaele Ruggiero
1062 - A Unified Sensor-Centric Approach to Cooperative and Non-Cooperative Spacecraft Collision Avoidance
Samuel Hilton, Alessandro Gardi, Roberto Sabatini
1091 -  Checking the Robot-manipulator Control System at Preparation and Capturing a Passive Satellite
Yevgeny Somov, Sergey Butyrin, Sergey Somov, Tatyana Somova
1029 - Comparative Assessment of Tribological Properties of Selected Polymers and Polymer Composites
Jerzy Jozwik, Krzysztof Dziedzic, Marcin Barszcz, Mychajło Paszeczko
1077 - GNSS-aware Path Planning for UAV swarm in complex environments
Flavia Causa, Giancarmine Fasano, Michele Grassi
1127 - An experimental test of the relation M. α Rea and of the corresponding model to estimate the efficiency of a supermassive black hole
Antonio Feoli, Antonella Lucia Iannella
1095 -  Health Checking of a Spacecraft Control System in the Orientation Initial Modes
 Nikolay Rodnishchev, Yevgeny Somov, Tatyana Somova
1034 - Effect of Brushing Conditions on Axial Forces in Ceramic Brush Surface Treatment
Jakub Matuszak, Mariusz Kłonica, Ireneusz Zagórski
1146 - An Innovative Medium-Altitude Long-Endurance Unmanned Aircraft System with Advanced Flight Management and Navigation Features
Domenico Accardo, Giancarlo Rufino, Claudia Conte
1052 -  Analysis on the solar irradiance fluctuations effect on the BepiColombo Superior Conjunction Experiment
 Ivan di Stefano, Paolo Cappuccio, Luciano Iess 
1131 -  Effective Method of Predicting and Checking the Brake-way of Aircraft
Andrey Shevchenko, Boris Pavlov, Galina Nachinkina
1045 - Smart Inspection Tools in robotized aircraft panels manufacturing
Cristina Cristalli
 
16:10 - 16:30 COFFEE BREAK
16:30 - 17:50 Session #21 Session #22 Session #23 Session #24
GENERAL SESSION PART 4 SPECIAL SESSION ON GARFIELD - GREEN, ACCESSIBLE AND SAFE GRASSY AIRFIELDS. METROLOGY, METHODS AND INSTRUMENTATION GENERAL SESSION PART 5 GENERAL SESSION PART 6
1042 -  High accuracy time and frequency dissemination for space geodesy and aerospace
Cecilia Clivati, Martina Gertosio, Filippo Levi, Alberto Mura, Davide Calonico
1079 - Measurement of Forces and Moments Acting on Aircraft Landing Gear Wheel
Jarosław Pytka, Piotr Budzynski, Jerzy Jozwik, Tomasz Lyszczyk, Jan Laskowski, Ernest Gnapowski
1041 - The Clean Sky 2 MIDAS Project - an Innovative Modular, Digital and Integrated Air Data System for Fly-by-Wire Applications
 Angelo Lerro, Manuela Battipede, Piero Gili, Michele Ferlauto, Alberto Brandl, Andrea Merlone, Chiara Musacchio, Giovanni Sangaletti, Giuseppe Russo 
1078 - Space Metrology Problems of the Future Planetary Defense System with Pulsar Time, Navigation and Positioning
Maciej Mroczkowski
1002 - Impact damage investigation on GF reinforced Vinyl Ester resins laminates at room and lower temperature by means of ESPI
Vito Pagliarulo
1080 - Measurement of Takeoff and Landing Ground Roll of Airplane on Grassy Runway
Jarosław Pytka, Piotr Budzynski, Jerzy Jozwik, Tomasz Lyszczyk, Jan Laskowski, Ernest Gnapowski
NA - New applications for Compact Optical Attitude Sensor (COATS) for space
Marco Pisani, Massimo Zucco, Andrea Egidi and Sergio Mottini
1010 -  A New Cubature Kalman Filtering with M-method for Attitude Determination
Haoqian Huang
1040 - Preliminary characterization of a Rb Pulsed Optically Pumped clock for space applications
Salvatore Micalizio, Claudio Calosso, Filippo Levi, Michele Gozzelino, Marina Gioia, Piergiorgio Arpesi, Adalberto Sapia, Romano Romani, Jacopo Belfi, Nicholas Marzoli, Alberto Tuozzi, Marco Belloni
1082 - GRASSTAM – An Idea of a Notice on Grassy Runway Condition
Jarosław Pytka, Piotr Budzynski, Jerzy Jozwik, Tomasz Lyszczyk, Jan Laskowski, Ernest Gnapowski 
1036 -  LED-based attitude reconstruction and back-up light communication: experimental applications for the LEDSAT CubeSat
Paolo Marzioli, Andrea Gianfermo, Lorenzo Frezza, Diego Amadio, Marco Acernese, Leonardo Parisi, Giammarco Cialone, Maria Giulia Pancalli, Eleonora Vestito, Federico Curianò, Niccolò Picci, Fabrizio Piergentili, Fabio Santoni
1063 - Optimization of the sensor “MicroMED” for the ExoMars 2020 mission: the Flight Model design
Giuseppe Mongelluzzo, Francesca Esposito, Fabio Cozzolino, Diego Scaccabarozzi, Bortolino Saggin
N/A - A method for measuring the moment of inertia of components for space and nanosats
M. Pisani, A. Malengo, M. Santiano, M. Astrua, Srijith Bangaru Thirumalai Raj 
1083 -  GARFIELD Information System – Old Problems and New Perspectives
Jarosław Pytka, Piotr Budzynski, Jerzy Jozwik, Tomasz Lyszczyk, Jan Laskowski, Ernest Gnapowski
1105 - Alignment and optical performance of the Metis coronagraph for the Solar Orbiter mission
Fabio Frassetto, Vania Da Deppo, Paola Zuppella, Marco Romoli, Silvano Fineschi, Ester Antonucci, Giampiero Naletto, Gianalfredo Nicolini, Piergiorgio Nicolosi, Daniele Spadaro, Vincenzo Andretta, Marco Castronuovo, Gerardo Capobianco, Marta Casti, Federico Landini, Giuseppe Massone, Maurizio Pancrazzi, Roberto Susino, Luca Teriaca, 
N/A Airplane Subsystem Testing at The Military University of Technology
K. Wojtowicz, M. Henzel, M. Ważny, S.Kachel, Z. Rochala, A. Olejnik, M. Jasztal, R. Rogólski, S. Wrzesień, E. Balestrieri, P. Daponte, L. De Vito, F. Lamonaca, S. Rapuano, L. Viglione
17:50 - 18:10 CLOSING AND AWARD CEREMONY
POSTER SESSION
PS1 989 STRATEGY AND ALGORITHMS OF PILOTED WIG-CRAFT AUTOMATIC CONTROL AT POSSIBLE FAILURES OF PRIMARY SENSORS
Alexander V. Nebylov, Vladimir A. Nebylov, Hamza Benzerrouk
PS2 995 Human-in-the-Loop Ekranoplane Motion Control System Design
Alexander I. Panferov, Alexander V. Nebylov, Sergey A. Brodsky
PS3 978 Radars for probing the terrestrial ionosphere: a historical overview and today’s measurements
Umberto Sciacca, Enrico Zuccheretti
PS4 991 Radars with the function of detecting and tracking artillery shells - selected methods of field testing
Marek Brzozowski, Mariusz Pakowski
PS5 996 Research on radar angular and range resolution with the use of a system assisting the pilots in maintenance of flight parameters
Mariusz Pakowski, Marek Brzozowski
PS6 1008 Advanced Architectures for Detection and Estimation in Heterogeneous Environments
Jun Liu, Davide Massaro, Danilo Orlando, Alfonso Farina
PS7 1142 High-resolution topographic surveys and earth features extraction through LiDARs. Discussion of some Case Studies
Silvia Liberata ULLO, Chiara Zarro
PS8 1038 New Precise Point Positioning Software for Upgrade of the Time Monitoring and Steering Service of the H2020 DEMETRA Project
WEI HUANG, Pascale Defraigne, Giovanna Signorile, Ilaria Sesia
PS9 1065 A High-Accuracy Horizon Sensor for Small Satellites
Dario Modenini, Marco Zannoni
PS10 1096 A novel demodulation method based on partial period curve-fitting for FM signal in Impact Acceleration Calibration by Using Laser Interference Methods
zhiguo liang
PS11 1116 Reliable and Robust UTC(IT) Generation Based on Master and Backup Time Scales Alignment at INRiM
Giovanna Signorile, Valerio Formichella, Marco Sellone, Alberto Mura, Marco Siccardi, Giovanni Daniele Rovera, Ilaria Sesia, Filippo Levi
PS12 1117 Learning to detect features from spaceborne images. Boulders detection on the martian surface
Mattia Mazzucato
PS13 1123 Characterization of commercial Fast Steering Mirrors for space application
Diego Scaccabarozzi
PS14 1059 Rover Relative Localization Testing in Martian Relevant Environment
Sebastiano Chiodini, Marco Pertile, Riccardo Giubilato, Federico Salvioli, Diego Bussi, Marco Barrera, Paola Franceschetti, Stefano Debei
PS15 1074 Testing of a controlled parafoil with airdrop tests from UAV
carlo bettanini, mirco bartolomei, alessio aboudan, giacomo colombatti
PS16 1112 The in-flight calibration procedures of the Shadow Position Sensors (SPS), a very accurate optical metrology system of the ESA/PROBA-3 formation flying mission
Gerardo Capobianco, Silvano Fineschi, Davide Loreggia, Marta Casti, Damien Galano, Alessandro Bemporad, Federico Landini, Vladimiro Noce, Marco Romoli, Cedric Thizy
PS17 1125 The Occulter Position Sensor Emitters (OPSE) metrology sub-system for the PROBA-3 mission
Davide Loreggia
PS18 1128 Qualification of MEMS differential pressure sensors in Martian-like environment
Diego Scaccabarozzi
PS19 1134 Optical metrology for measuring Earth’s gravity
Stefano Cesare, Alberto Anselmi, Gino Bruno Amata, Luciana Bonino, Sergio Mottini, Kolja Nicklaus, Luca Massotti, Bruno Leone, Marco Pisani, Massimo Zucco
PS20 1119 A Rotors Spin-up and Checking a Switching on the Redundant Controlling Gyro Cluster into Spacecraft Attitude Control System
Yevgeny Somov, Sergey Butyrin, Sergey Somov, Tatyana Somova
PS21 1130 Identification and Stochastic Checking a Control Safety at a Landing of Aerospace Vehicles
Nikolay Rodnishchev, Tatyana Somova
PS22 1092 Prediction and verification of an aircraft takeoff trajectory with high-altitude obstacles
Andrey Shevchenko, Boris Pavlov, Galina Nachinkina
PS23 1132 Diagnosability of GNSS/IMU System without Hardware Redundancy
Paolo Castaldi, Nicola Mimmo, Massimiliano Menghini
PS24 987 UAS for positioning and field mapping using LIDAR and 10-DOF IMU sensors data: Kalman filtering and integration
Umberto Papa, Gennaro Ariante, Salvatore Ponte, Giuseppe Del Core
PS25 1023 Optimized observation arrangement based on multi-agent
Runle Du
PS26 1054 Cloud Detection System for UAV Sense and Avoid: First Results of Cloud Segmentation in a Simulation Environment
Adrian Dudek, Franziska Funk, Martin Russ, Peter Stütz
PS27 1120 Concept of wireless measurement system of UAV jet engine rotor
Paulina Kurnyta-Mazurek, Artur Kurnyta, Maciej Henzel
PS28 1162 Precise Remote Sensing Using Unmanned Helicopter
Aleksander Olejnik, Lukasz Kiszkowiak, Robert Rogólski, Grzegorz Chmaj, Michał Radomski, Maciej Majcher, Łukasz Omen
PS29 1166 An Innovative Bifocal Metrology System based on projective techniques for Aerospace Applications
Fulvio Bresciani
PS30 1164 Cluster Layout for an Optical Wireless Sensor Network for Aerospace Applications
Fabio Leccese
PS31 1021 A multi-channel system for on-line structural health monitoring using guided waves
Vittorio Memmolo, Leandro Maio, Ernesto Monaco, Nicola Ciminiello, Barbara Di Giampaolo
PS32 1140 Electromechanical Impedance Measurement for De-Icing Applications based on Piezoelectric Actuators
Leandro Maio
PS33 NA Embedded ADC testing challenges: proposals from research
E. Balestrieri, P. Daponte, L. De Vito, F. Picariello, S. Rapuano, I. Tudosa